Calpeda 2 MXVE pressure booster set with 2 vertical multi-stage pumps + 2 frequency converters
Automatic pressure station with two vertical link pumps with ball valve, non-return valve on suction and ball valve on discharge, suitable for installation of two 20 liter pressure vessels (for 2 MXVE 25,32,50) and one 20 l (for 2 MXVE 50, 65,80).. Suction and discharge pipes are made of stainless steel AISI 304.
- Brand:
- CALPEDA
- Category:
- Pressure booster sets - vertical
- Product No.:
- MAS000280
Product description
Switchboard
- With frequency converter control for variable speed pumps
- The device is equipped with a manometer and two adjustable differential pressure switches
Traffic
- BS1V1F Variable speed pumps with one frequency converter
- According to the flow requirements, the pumps, one with variable speed and the other with constant speed, are started to provide the required amount of water at a constant pressure
- BS2V Variable speed pumps with two frequency converters
- According to the flow requirements, the pumps, both with variable speed, are started to provide the required amount of water at a constant pressure
Use
- For pumping water from a well or borehole
- To increase the pressure of the distribution network (follow local regulations and consult with the owner of the water supply)
Engine
- 2-pole asynchronous motors, 50 Hz, n = 2900 1/min.
- Suitable for use with a frequency converter
- Three-phase:
- 230/400V ± 10% up to 3kW
- 400/690V ± 10% up to 4 up to 15kWkW Insulation class F
- Degree of protection IP 55
- Constructed in accordance with: IEC 60034
- Other voltages and frequencies on request
Pressure vessels (on request)
- During installation, the outlet must be connected to membrane or pressure vessels
Instructions
Technical Specifications
- Maximum flow [l/min]
- 8 000
- Power input - P1 [kW]
- 1,10
- Cable length [m]
- 100
Product Safety Information
Company responsible for product safety:
Calpeda S.p.A.
Via Roggia di Mezzo 39, 36050 Montorso Vicentino, IT
e-mail: [email protected]